iRubric: Conduit Bending rubric

edit print share Copy to my rubrics Bookmark test run assess... delete Do more...
Conduit Bending Conduit Bending EMT Conduit Bending Rubric Code: X24A5B4 By Sam187689 Ready to use Public Rubric Subject: Vocational Type: Assessment Grade Levels: 9-12

All Bending Labs
	Poor 5 pts	Fair 10 pts	Average 15 pts	Good 20 pts	Excellant 25 pts
Measurements	Poor all measurements within 3/8"	Fair one measurement within 1/4"<BR> one within 3/8"	Average all measurements within 1/4"	Good one measurement correct within 1/8"<BR> others within 1/4"	Excellant all measurements correct within 1/8"
Angles	Poor At least 1 angle off by 4 degrees or more	Fair All angles off by 2-3 degrees	Average one angle good and one or more of the others off by 2-3 degrees	Good on multiple angle bends one angle off by over 2-3 degrees	Excellant all angles good
Accuracy	Poor Four shims can be put between conduit and smooth surface.	Fair three shims can be put between conduit and smooth surface	Average two shims can be put between conduit and smooth surface	Good one shim can be put between conduit and smooth surface	Excellant all sides lay down flat on smooth surface.
Time Taken/Safety All time in lab is used wisely. Examples of safety violations: Tools lying haphazardly on floor. Safety glasses not on at all times while working in lab. Cell phones or other portable electronics are considered a safety hazard while working.	Poor Time in lab was not used wisely or had one more than one safety violations	Fair	Average	Good	Excellant Completed the project in timely manner and no Safety violations.