- Username
- Password
forgot?

iRubric: Isometric Introduction rubric

edit print share Copy to my rubrics Bookmark test run assess... delete Do more...
Isometric Introduction Geometry Drawings and Creation of 3-D Model This rubric will be used for the student(s) baseline assessment as well as their final assessment Rubric Code: WB8WAC By stansbew Ready to use Public Rubric Subject: Vocational Type: Assessment Grade Levels: 9-12

3-D Geometric Shapes/figures
	Below Basic 1 pts	Basic 2 pts	Proficient 3 pts	Advanced 4 pts
Drawing 70 % Top view, front view, side view	Below Basic Inappropriate lines were used and contributed to a figure that was poorly created/sketched and measured.	Basic Some appropriate lines were used and contributed to a figure that contained some straight lines and adequate measurement(s).	Proficient Appropriate lines/starting and finishing points were selected, and there was an attempt at modifications that led to a geometrical figure, according to specifics.	Advanced Appropriate lines/starting points and finishingpoints were selected, and there is clear evidence of modifications/calcula-tions that led to a specific/accurate geometrical figure, according to specifics
3-Dimensional-created figure 20 %	Below Basic Inappropriate lines were used to create, cut and build the figure. These also contributed to a figure that was poorly created.	Basic Some appropriate lines were used to create, cut and build the figure. These also contributed to a figure that was adequately created.	Proficient Appropriate lines were used to create, cut and build the figure. These also contributed to a figure that shows modifications which led to a carefully made geometrical figure.	Advanced Appropriate and clearly defined lines were used to create, cut and build the figure. These also contributed to a figure that shows modifications which led to an outstanding geometrical figure.
3-D creation 5 %	Below Basic Creation lacks neatness, with minimal spacing of materials. Measurements of sides, angles and faces are simple.	Basic Creation has some neatness, with adequate spacing of materials. Measurements of sides, angles and faces are unclear.	Proficient Creation is neat, with accurate spacing of materials. Measurements of sides, angles and faces are clearly visible.	Advanced Creation is neat, with well developed spacing of materials. Measurements of sides, angles and faces are fully visible.