iRubric: Lube, Oil and Filter Evaluation rubric

edit print share Copy to my rubrics Bookmark test run assess... delete Do more...
Lube, Oil and Filter Evaluation Rubric Code: UXXB46 By BobMcClure Ready to use Public Rubric Subject: Vocational Type: Project Grade Levels: 9-12

Lube, Oil & Filter Evaluation
	Poor 1 pts	Fair 2 pts	Good 3 pts
Oil Filter Installation	Poor The gasket on the oil filter is not lubricated with engine oil and the filter is left loose.	Fair The gasket on the oil filter is lubricated, but the filter is left a bit loose and there are finger prints on the filter.	Good The gasket on the new filter is lubricated with clean engine oil and installed hand tight. No greasy finger prints are left on the filter.
Adding Engine Oil	Poor The clean engine oil is added but the drain plug was not installed.	Fair The drain plug was installed but is missing the gasket and the proper amount of clean engine oil was added.	Good The drain plug was cleaned, it has a gasket and the proper amount of clean engine oil is added using a clean funnel.
Starting the Engine	Poor Two of the three parameters missing: loose drain plug, no drain plug gasket, loose oil filter, not observing the gauge or light upon starting the engine.	Fair Missing drain plug gasket, or loose oil filter or student not observing the gauge or light as engine is started.	Good The oil filter was properly hand tightened and clean engine oil was installed. Student was the gauge or light to make sure there is oil pressure in 15 seconds.