Skip to main content

iRubric: Welding Assessment rubric

find rubric

edit   print   share   Copy to my rubrics   Bookmark   test run   assess...   delete   Do more...
Welding Assessment 
Welding Assessment
Students will use wire feed welding techniques to weld a butt joint
Rubric Code: U47488
By CCPGroup
Ready to use
Public Rubric
Subject: Vocational  
Type: Assignment  
Grade Levels: (none)

Powered by iRubric Criteria
  Excellent

4 pts

Good

3 pts

Fair

2 pts

Undeveloped

1 pts

Total Points

(N/A)

Weld width and height:

Uniform width and thickness throughout the entire length of each weld.
Excellent

Bead is uniform width all along the length of each welld. Has a smooth appearance
Good

Bead maintains width and length. Shows some small blemishes along the weld
Fair

Not a uniform thickness through out the weld. Thickness goes to extremes
Undeveloped

Weld is cut off in places, not uniform along the weld. Shows bare spots
Total Points
Appearance

Smooth with uniform dense ripples, doesn’t show the bead traveling to fast or slow
Excellent

Weld shows a constant speed and uniformity the entire length
Good

Weld shows a constant speed with some blemishes that are minimal
Fair

Weld shows definite areas of speeding up and slowing down. Ripples tend to be coarse
Undeveloped

Weld has been done to fast or to slow. Weld is not complete
Total Points
Face of bead:

Convex, free of voids and high spots, shows uniformity throughout the bead
Excellent

Has a nice rounded look. Is not overly high, or low. Bead covers a wide area of each weld.
Good

Bead is well rounded, mostly uniform over the length of the weld. Shows some high spots and low spots
Fair

Bead shows many high and low area's. Total lack of uniformity throughout the weld
Undeveloped

Weld does not blend into one single bead.
Total Points
Edge of bead

Good fusion, no overlapping or undercutting
Excellent

Sides and edges are smooth blending into each weld. Undercutting is kept to a minimum, Weld does not float on surface
Good

Moderately smooth blending. Undercutting and float are present. Stength of the weld is still strong
Fair

Float and undercut are very apartent. Weld lacks strength and flow
Undeveloped

Metal is burned through. Weld has no connection to metal,
Total Points
Beginning and ending full size

Crater well filled
Excellent

End of each weld is complete, the line doesn't taper off
Good

Weld ending is full but shows some tapering and a craterpresent
Fair

Crater distinctly present at the end of the bead.
Undeveloped

Metal is burned through at the end
Total Points
Surrounding Plate

Welding surface free of spatter
Excellent

Spatter is kept to a minuimum.
Good

Some spatter is present but not displeasing
Fair

Spatter is in large amounts
Undeveloped

Spatter takes away from the integrity of the weld.
Total Points
Penetration

Complete without burn through
Excellent

Weld penetrates deep into the metal and adds strength and fusion to the edges and depth.
Good

Weld pentetrates deep but does not re surface through the bottom of a jointed welds
Fair

Weld is uneven in depth, lacks uniformity along weld length.
Undeveloped

Weld floats on top of the metal. Has no strength
Total Points




Subjects:


Discuss this rubric




Do more with this rubric:
Preview

Preview

Preview this rubric.
Edit

Edit

Modify this rubric.
Copy

Copy

Make a copy of this rubric and begin editing the copy.

Print

Print

Show a printable version of this rubric.
Categorize

Categorize

Add this rubric to multiple categories.
Bookmark

Bookmark

Bookmark this rubric for future reference.
Assess
Test run

Test run

Test this rubric or perform an ad-hoc assessment.
Grade

Grade

Build a gradebook to assess students.
Collaborate

Collaborate

Apply this rubric to any object and invite others to assess.
Share
Publish

Publish

Link, embed, and showcase your rubrics on your website.
Email

Email

Email this rubric to a friend.
Discuss

Discuss

Discuss this rubric with other members.
 

Do more with rubrics than ever imagined possible.

Only with iRubrictm.

n202