iRubric: 3/32" - E-7018 SMAW Fillet weld rubric

edit print share Copy to my rubrics Bookmark test run assess... delete Do more...
3/32" - E-7018 SMAW Fillet weld 3/32" - E-7018 SMAW Fillet weld Students will make 1F, 2F, 3F, and 3F Weave on 3/16" Carbon Steel. Rubric Code: NX7595B By Tony01 Ready to use Public Rubric Subject: Vocational Type: Project Grade Levels: 9-12

1F, 2F, 3F, 3F Weave Fillet
	Unacceptable 1 pts	Needs Improvement 2 pts	Acceptable 3 pts	Very Good 5 pts
Weld width and height:	Unacceptable Weld is cut off in places, not uniform along the weld. Shows bare spots.	Needs Improvement Not a uniform thickness through out the weld. Thickness goes to extremes.	Acceptable Bead maintains width and length. Shows some small blemishes along the weld.	Very Good Bead is uniform width all along the length of each weld. Has a smooth pleasing appearance.
Appearance	Unacceptable Weld has incorrect travel speed showing areas that are to fast or to slow. Weld is not complete.	Needs Improvement Weld has majority of length that has incorrect travel speed showing areas that are to fast or to slow. Ripples tend to be coarse	Acceptable Weld is mostly correct in travel speed showing minimal areas that are to fast or to slow.	Very Good Weld shows a constant speed and uniformity the entire length.
Face of bead/Edge of bead	Unacceptable Weld does not blend into one single bead. Metal is burned through. Weld has no connection to metal.	Needs Improvement Bead shows many high and low area's. Total lack of uniformity throughout the weld. Float and undercut are very apparent. Weld lacks strength and flow	Acceptable Bead is well rounded, mostly uniform over the length of the weld. Shows some high spots and low spots. Moderately smooth blending. Undercutting and float are present. Strength of the weld is still strong	Very Good Has a nice rounded look. Is not overly high, or low. Bead covers a wide area of each weld.Sides and edges are smooth blending into each weld. Undercutting is kept to a minimum, Weld does not float on surface
Fit up/Leg length	Unacceptable Fillet welds do not have have equal leg lengths. Fitt-up is not equal on all sides	Needs Improvement Fillet welds have equal leg lengths. Fitt-up is unequal on 3-4 all sides.	Acceptable Fillet welds small areas of having unequal leg lengths. Fitt-up has a small amount of unequal fit-upon on 1-2 sides.	Very Good Fillet welds have equal leg lengths. Fitt-up is equal on all sides
Correct # of passes	Unacceptable Cannot tell how many beads are deposited.	Needs Improvement Can make out 1-2 beads that have been deposited	Acceptable Can make out 2-3 bead that have been deposited.	Very Good Can count 3 beads.