iRubric: Dice Welding Project rubric

edit print share Copy to my rubrics Bookmark test run assess... delete Do more...
Dice Welding Project Dice Welding Project This project will show the students ability to weld by creating metal dice out of scrap metal. Rubric Code: JX245A4 By ghoorne Ready to use Public Rubric Subject: Vocational Type: Project Grade Levels: 9-12

Welding Dice
	INCOMPLETE 0 pts	LIMITED 1 pts	BASIC 2 pts	Good 4 pts	Very good 3 pts	TOTAL (N/A)
Squareness	INCOMPLETE	LIMITED The joints of the dice are not square, either greater than 100 degrees or less than 80 degrees.	BASIC The joints of the dice are in between 95 degrees and 100 degrees, or 85 degrees and 80 degrees.	Good Over half the joints are 90 degrees and the rest are within 5 degrees.	Very good The joints are 90 degrees at each joint.	TOTAL
Roundness of dot holes	INCOMPLETE	LIMITED The dots are not round, closer to square or squiggly lines.	BASIC The dots have a roundness, but more oval than circle.	Good The dots are more round than circle.	Very good The dots are perfectly round, not weld slashes either.	TOTAL
Appearance of Dice	INCOMPLETE	LIMITED The dice's overall look is very slopply, no buffing has been done, or grinding is very sloppy.	BASIC The dice's appearance is somewhat sloppy. Buffing has been done but is incomplete, or over ground.	Good The dice's overall appearance is good. Most of the buffing has been done and is acceptable	Very good The dice's overall appearance is excellent. Buffing has been done well, and looks nice.	TOTAL
Strength	INCOMPLETE	LIMITED The welds are not strong. The dice break under the step test.	BASIC The weld is somewhat strong.The dice bend under the step test.	Good Most of the welds are strong. Little to no movement under the step test.	Very good The welds are strong. Stays in shape and together under the step test.	TOTAL