Skip to main content

iRubric: Hand tool project rubric

find rubric

edit   print   share   Copy to my rubrics   Bookmark   test run   assess...   delete   Do more...
Hand tool project 
Hand tool project
Students and teachers will use this to evaluate their ability to follow a plan to produce a functional product.
Rubric Code: H24BA76
By DarenJohnson
Ready to use
Public Rubric
Subject: Engineering  
Type: Project  
Grade Levels: 6-8

Powered by iRubric Key Rack
  Excellent

10 pts

Good

7 pts

Fair

4 pts

Poor

1 pts

Layout

Excellent

-Evidence of clear understanding and following the plan.
-Measurements are accurate.
- Tool choice is correct for marking on the materials.
Good

- Evidence of basic understanding and following the plan.
- Measurements are within a 1/16" tolerance.
- Tool choice is usually correct for marking on the materials.
Fair

- Evidence of some understanding and following the plan.
- Some measurements are outside the 1/16" tolerance.
- Little variation in tool choice for marking on materials, same tool used for several operations.
Poor

- No evidence of understanding and following the plan.
- Most measurements are wrong according to the plan.
- Layout was done with a ruler only.
Workmanship

Excellent

- Great care taken in tool use and construction to make the product look like the prototype.
- Chamfer is uniform on all surfaces and corners are square.
-All 5 holes are aligned.
-Product is symmetrical.
Good

Care taken in tool use and construction to make the product closely looks like the prototype.
- Chamfer varies slightly and some corners may not be square.
- Some holes may be misaligned.
- Symmetry of the product is slightly off.
Fair

Limited care taken in tool use and construction so that the product resembles the prototype.
- Chamfer varies on many edges.
- Many of the holes are misaligned.
- Product lacks symmetry.
Poor

Haphazard care taken in tool use and construction so that the product does not resemble the prototype.
- Chamfer does not resemble a chamfer on any of the edges.
- All holes are misaligned.
- Product is not symmetrical.
Appearance

Excellent

- Final product is neat, clean, free from defects.
- Evidence of sanding all surfaces with fine abrasive paper.
- Proper amount of oil was applied for a nice looking product.
- Hanger and hooks were assembled so that key rack will hang straight and function well.
Good

- Final product is somewhat neat with some defects and most corners are square.
Evidence of sanding some surfaces with fine abrasive paper.
- Slightly to to much or too little oil was applied.
- Hanger and hooks were assembled so that key rack will function well.
Fair

- Final product has flaws/defects that were ignored.
- Evidence of sanding all surfaces with rough abrasive paper only.
- Amount of oil applied did not dry completely, finish is tacky to touch.
- Hanger and hooks were assembled so that key rack hangs at a slight angle but will function.
Poor

- No attempt to remove flaws including pencil marks and rough shaping marks.
-No Evidence of sanding all surfaces with abrasive paper.
- So much oil was applied that product will not dry.
- Hanger and hooks were assembled so that key rack may not function.




Subjects:

Types:

Discuss this rubric




Do more with this rubric:
Preview

Preview

Preview this rubric.
Edit

Edit

Modify this rubric.
Copy

Copy

Make a copy of this rubric and begin editing the copy.

Print

Print

Show a printable version of this rubric.
Categorize

Categorize

Add this rubric to multiple categories.
Bookmark

Bookmark

Bookmark this rubric for future reference.
Assess
Test run

Test run

Test this rubric or perform an ad-hoc assessment.
Grade

Grade

Build a gradebook to assess students.
Collaborate

Collaborate

Apply this rubric to any object and invite others to assess.
Share
Publish

Publish

Link, embed, and showcase your rubrics on your website.
Email

Email

Email this rubric to a friend.
Discuss

Discuss

Discuss this rubric with other members.
 

Do more with rubrics than ever imagined possible.

Only with iRubrictm.

n52