iRubric: adv woodworking final exam birdhouse rubric

edit print share Copy to my rubrics Bookmark test run assess... delete Do more...
adv woodworking final exam birdhouse Fabrication 7 - Birdhouse Rubric for scoring wood projects in Fabrication. Rubric Code: E248CX4 By jmk1234 Ready to use Public Rubric Subject: Vocational Type: Assignment Grade Levels: 6-8

Wood Project
	Mastered 4 pts	Skilled 3 pts	Competent 2 pts	Learning 1 pts
dimensions	Mastered Measurements are accurate. parts are machined to the correct size and square	Skilled 1 or 2 small measurement errors. parts are machined square	Competent A few large errors. Very little accuracy in following plans.	Learning No attention to measurements. Virtually no reference to plans and process.
sides	Mastered Outside surface is flush. Boards overhang 1/2" at corners and alternate lap. Measurements are accurate.	Skilled Boards are mostly flush.	Competent Several boards are not flush. Corners do not lap correctly. Door size is incorrect.	Learning Walls have been constructed haphazardly with little or no attention to detail.
Roof	Mastered Gable ends are accurate. Shingles are straight and correct size. No staples visible. Shingles are in good condition.	Skilled Gable ends slightly out of alignment. 1 or 2 staples visible. Shingles are mostly straight.	Competent Ridge is crooked due to gable ends being misplaced. Shingles are mostly NOT straight. Numerous staples are visible.	Learning No reference to the instructions or drawings. Parts of the roof are not covered with shingles. Shingles are bent and damaged. Staples are showing all over.
hole placement	Mastered hole is drilled, size correct, in proper location to plan	Skilled hole drilled, size correct, location wrong	Competent hole drilled, wrong size	Learning no hole drilled
Appearance	Mastered parts are properly fabricated to size from print, screws are set evenly, care seems evident for the final project	Skilled parts are properly fabricated to size from print, screws are set evenly, little care seems evident for the final project	Competent parts are properly fabricated to size from print, screws are not set evenly, wrong location to plan	Learning parts not properly fabricated to size from print, screws are not set evenly, wrong location to plan.