Task not attempted
0 pts
All requirements of task included and properly done.
5 pts
Washes hands with antimicrobial soap.
Choose the appropriate sized-gloved
Place the glove package on a clean flat surface. Open the glove package without touching the inside of the wrapper. The tops of the gloves are turned down to form a cuff.
Pick up the first glove on the inside of the cuff with the fingers of the opposite hand, being sure not to touch the outside of the glove with your ungloved hand.
Step back and pull the glove on. Allow the cuff to remain turned back on itself.
Pick up the second glove by slipping your sterile gloved fingers under its cuff and grasping the opposite side of the cuff with your thumb
Remove your thumb from the cuff and pull the glove on. Turn back the cuff.
Turn back the cuff of the first glove by reaching under the cuff with the other gloved hand. Do not allow your sterile gloved hand to come in contact with the inside of the cuff
Adjust the gloves to a comfortable position. Inspect for tears.
With your gloved left hand, grasp the outside of the right glove 1 to 2 inches from the top.
It turns inside our as it is removed from your hand.
Pull the right glove free, and scrunch it into a ball with your gloved left hand.
Place the index and middle fingers of the right hand on the inside of the left glove. Do not allow your clean hand to touch the outside of the glove
Pull the second glove off the left hand. It turns inside out as it is removed from your hand, enclosing the balled-up right glove.
Discard both gloves in an appropriate waste container.
Wash hands to remove any microorganisms that may have come in contact with your hands.