iRubric: SMAW E-6010 1/8" 3/4" fillet weld all positions rubric

edit print share Copy to my rubrics Bookmark test run assess... delete Do more...
SMAW E-6010 1/8" 3/4" fillet weld all positions SMAW E-6010 1/8" pad-o-weld Students will use SMAW welding techniques to weld a 3/4" fillet weld Rubric Code: B87326 By whip2001 Ready to use Public Rubric Subject: Vocational Type: Project Grade Levels: 9-12

Welding Joints
	Advanced 10 pts	Proficient 8 pts	Basic 6 pts	Below Basic 4 pts	Total Points (N/A)
Weld width and height: 100 % Uniform width and thickness throughout the entire length of each weld.	Advanced Bead is uniform width all along the length of each welld. Has a smooth appearance	Proficient Bead maintains width and length. Shows some small blemishes along the weld	Basic Not a uniform thickness through out the weld. Thickness goes to extremes	Below Basic Weld is cut off in places, not uniform along the weld. Shows bare spots	Total Points
Appearance 100 % Smooth with uniform dense ripples, doesn’t show the bead traveling to fast or slow	Advanced Weld shows a constant speed and uniformity the entire length	Proficient Weld shows a constant speed with some blemishes that are minimal	Basic Weld shows definite areas of speeding up and slowing down. Ripples tend to be coarse	Below Basic Weld has been done to fast or to slow. Weld is not complete	Total Points
Face of bead: 100 % Convex, free of voids and high spots, shows uniformity throughout the bead	Advanced Has a nice rounded look. Is not overly high, or low. Bead covers a wide area of each weld.	Proficient Bead is well rounded, mostly uniform over the length of the weld. Shows some high spots and low spots	Basic Bead shows many high and low area's. Total lack of uniformity throughout the weld	Below Basic Weld does not blend into one single bead.	Total Points
Edge of bead 100 % Good fusion, no overlapping or undercutting	Advanced Sides and edges are smooth blending into each weld. Undercutting is kept to a minimum, Weld does not float on surface	Proficient Moderately smooth blending. Undercutting and float are present. Stength of the weld is still strong	Basic Float and undercut are very apartent. Weld lacks strength and flow	Below Basic Metal is burned through. Weld has no connection to metal,	Total Points
Beginning and ending full size 100 % Crater well filled	Advanced End of each weld is complete, the line doesn't taper off	Proficient Weld ending is full but shows some tapering and a craterpresent	Basic Crater distinctly present at the end of the bead.	Below Basic Metal is burned through at the end	Total Points
Enter Title