iRubric: SMAW Welding Rubric

edit print share Copy to my rubrics Bookmark test run assess... delete Do more...
SMAW Welding Rubric SMAW Welding Rubric Students will demonstrate 3 beads using the 6011 electrode and the whip technique Rubric Code: J247234 By jmk1234 Ready to use Public Rubric Subject: Vocational Type: Assessment Grade Levels: Undergraduate

Welding Joints
	Proficient 3 pts	Basic 2 pts	Below Basic 1 pts	Total Points (N/A)
Weld width and height: 100 % Uniform width and thickness throughout the entire length of each weld.	Proficient Bead maintains width and length. Shows some small blemishes along the weld	Basic Not a uniform thickness through out the weld. Thickness goes to extremes	Below Basic Weld is cut off in places, not uniform along the weld. Shows bare spots	Total Points
Appearance 100 % Smooth with uniform dense ripples, doesn’t show the bead traveling to fast or slow	Proficient Weld shows a constant speed with some blemishes that are minimal	Basic Weld shows definite areas of speeding up and slowing down. Ripples tend to be coarse	Below Basic Weld has been done to0 fast or too slow. Weld is not complete	Total Points
Face of bead: 100 % Convex, free of voids and high spots, shows uniformity throughout the bead	Proficient Bead is well rounded, mostly uniform over the length of the weld. Shows some high spots and low spots	Basic Bead shows many high and low area's. Total lack of uniformity throughout the weld	Below Basic Weld does not blend into one single bead.	Total Points
Surrounding Plate 10 % Welding surface free of spatter	Proficient Some spatter is present but not displeasing	Basic Spatter is in large amounts	Below Basic Spatter takes away from the integrity of the weld.	Total Points
welding assement 6011 whip weld